Tufting AK V PRO Cut & Loop Pile (14mm) Kreoho®

Tufting AK V Pro Cut & Loop Pile (14mm) Kreoho® is a professional electric tufting machine designed for creating rugs, textile surfaces, and tufting projects. It combines precision, versatility, and operating comfort in a compact device, suitable for both professional artists and enthusiasts looking for a reliable, high-performance tool.

Equipped with a 120W Brushless DC motor, the AK V Pro delivers smooth operation with reduced noise and vibration compared to traditional tufting machines. The synchronous belt drive system ensures consistent movement, while the ergonomic rubber-coated handle provides a stable and comfortable grip during use.

The machine supports both Cut Pile and Loop Pile modes, allowing users to create surfaces with either cut or looped pile. The pile height is preset to 14mm and can be mechanically adjusted within a range of 7mm to 18mm, making it possible to achieve different textures and finishes according to project requirements.

The integrated digital display allows users to monitor and adjust the operating speed, while the front LED lighting improves visibility in the yarn insertion area. Weighing just 1.35kg and featuring an exclusive design in Kreoho® colors, the AK V Pro is a versatile solution for anyone seeking control, precision, and quality in tufting.

Add your content here

Proper maintenance of the Tufting Machine is essential to preserve tufting precision, minimize wear on mechanical components and maintain consistent performance over time. Cleaning, lubrication and periodic inspections must be carried out with the machine switched off and disconnected from the electrical supply.

Before each use

• Check that the power cable and power adapter are undamaged.
• Ensure that the front assembly, consisting of the spacer, needle and scissors, is clean and correctly installed.
• Check that the fastening screws of the needle assembly and connecting rods are properly tightened, without altering the mechanical adjustments.
• Make sure the fabric is properly tensioned on the frame.
• Check that the yarn feeds freely, without knots or obstructions.
• Ensure that all moving parts are adequately lubricated.

During tufting

• Keep the machine perpendicular to the fabric surface.
• Keep the front assembly properly positioned against the fabric, applying consistent pressure towards the frame.
• Guide the machine's movement without forcing it forward.
• Keep hands, fingers and all other parts of the body away from the needle, scissors and moving mechanical components.
• Take a break at least once every hour of continuous use.
• Stop working immediately if you notice unusual noises, abnormal vibrations or difficulty moving the machine forward.

Routine cleaning

Frequency: after each working session and during breaks, if necessary.

• Switch off the machine and disconnect the power adapter.
• Remove fibers, dust and yarn residue using a soft brush.
• Thoroughly clean the front assembly, paying particular attention to the needle, scissors and spacer.
• Use a clean, dry cloth to wipe the external surfaces.
• Avoid using compressed air, water, liquid cleaning products or solvents.

Routine lubrication

Frequency: after each working session and during breaks when using the machine for extended periods.

• Use a liquid lubricating oil suitable for precision mechanisms.
• Apply a small amount of lubricant to the pivot points and sliding surfaces of moving mechanical components.
• Pay particular attention to the connecting rods and the needle movement mechanism.
• Remove any excess lubricant with a dry cloth.
• Avoid thick greases and excessive lubrication, which may encourage fiber buildup.

Periodic inspections and wear-prone components

Frequency: before use and whenever any abnormalities are detected.

• Needle: check for deformation, breakage or visible damage. Replace it when necessary.
• Scissors: check that the yarn is cut consistently. Replace them if worn or if irregular cutting persists.
• Connecting rods and front assembly: visually check that the screws are securely fastened and that there is no abnormal mechanical play.
• Power adapter and cables: check for damage, unusual overheating or faulty connections.

Technical Interventions and Adjustments

Routine cleaning and lubrication can be performed directly by the user, following the instructions provided in the manual.

Adjusting the pile height, switching between Cut Pile and Loop Pile, and replacing mechanical components require following the technical procedures specified for this model.

In the event of persistent malfunctions, damage to electrical components, unusual mechanical noises or issues that cannot be resolved through routine maintenance, stop using the machine and contact Kreoho support before attempting any further interventions.

The Tufting Machine is covered by a 24-month warranty, in accordance with the conditions established by the applicable laws and regulations governing the sale.

To maintain the machine's proper operation and prevent potential malfunctions, it is essential to follow the instructions for use, cleaning and maintenance. Damage resulting from improper use, inadequate maintenance, unauthorized modifications or incorrect technical interventions may not be covered by the warranty, to the extent permitted by law.

In the event of any issues or malfunctions, the Kreoho® support service is available to carry out an initial technical assessment and identify the most appropriate solution.

To request assistance, please contact our Customer Care team through one of the following channels:

• Email: contact@kreoho.com
• WhatsApp: +39 379 277 7722

To help us assess the issue and speed up the support process, we recommend providing your order number and attaching photographs or, preferably, a short video clearly showing the malfunction encountered.

Our team will review your report and provide the necessary instructions for any inspections, technical interventions or other solutions available under the applicable warranty conditions.

Add your content here